כדי לראות את זה בפעילות, יש לעבור לאתר הפעיל שלך.

WLED WS2812B Fairy Lights Kit - Won't update

I need to update these lights after the latest HomeAssistant update. https://www.athom.tech/blank-1/wled-ws2812b-fairy-lights-kit says to use "WLED_0.x.x_ESP32-C3.bin" I downloaded the firmware from https://github.com/Aircoookie/WLED/releases but the update fails and does not complete.

Am I doing it wrong or is there custom firmware on these like the light bulbs? My 15W Bulbs were updated with the custom firmware with no problem.

2 תגובות

לייק

Comments (2)

Athom_Support

22 באוג׳

We have recently changed to another version. Please confirm the model of the controller. There is a clear mark on the controller. If it is ESP32C3, please use the corresponding firmware. If it is not marked with ESP32C3, please use WLED_0.x.x_ESP02.bin.gz

לייק

Joseph Hare

26 באוג׳

בתשובה לפוסט של

I figured it out. But you might want to update your website.

I bought this:

Which says to use: "WLED_0.x.x_ESP32-C3.bin"

However, it was showing ESP8266 in the WLED interface which made me look at:

WLED 2812B ESP8266 LED Strip Controller | athom

Which shows it can come with both the ESP8266 model and the ESP32C3 model. As a result, I used the "WLED_0.x.x_ESP02.bin.gz" firmware listed on that page and I am now good to go.

Now that leads to another question. Did I pay for an ESP32C3 and get an ESP8285(8266) for some reason? Either that or you need to update your product page and give the option to select which chipset we are ordering as you do for the Stand Alone controller.

Seeing as how the ESP32 chipset costs more I don't understand why my Fairy Light came as an ESP3285 when the product page says it comes with the ESP32.

נערכה

לייק

WLED WS2812B Fairy Lights Kit - Won't update

Terms of Use

Privacy Policy

Shipping Policy

Return Policy