hello, I had a problem: at first everything worked fine for me, I use athom LS-4P, everything worked fine, but one day I turn it on again but the tape does not work, I checked all the contacts and other tapes, but they did not light up, decide to update to 0.13 .3 (build 2208222) but I didn’t know that you can’t install WLED_0.13.3_ESP01.bin and now it tells me when updating OTA updating is disabled in this build. and the tape still doesn’t work, is there a way to fix this?
top of page
![](https://static.wixstatic.com/media/11062b_ea61c0ecc8b34ecd942c42470507e640f000.jpg/v1/fill/w_288,h_162,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/11062b_ea61c0ecc8b34ecd942c42470507e640f000.jpg)
כדי לראות את זה בפעילות, יש לעבור לאתר הפעיל שלך.
Comments (1)
bottom of page
You can only disassemble and re-flash the correct firmware using serial tools, you should use WLED_0.x.x_ESP02.bin, you must hold the button while flashing