top of page

    WLED  ESP32 RF433  Sounds Reactive Addressable  Strip Controller

     

    RF433 Built In

    The RF433 built-in WLED controller is specially designed so users can control the strip lights with an RF433 remote controller or trigger them using an  RF433 PIR sensor. The RF433 switch and RF433 PIR sensor are not necessarily purchased from us; you can use ones you already have.

     

    Sounds Reactive:

    High quality I2S PDM Digital Microphone has been Built in. 

     

    Flexible IOS expansion:

    There are two gpios can be used for professional users.  as there are no default sensor settings included in the firmware.Users will need to compile the firmware themselves in order to use the sensor features.

    The sensor output voltage is fixed at 5V.

     

    Specifications:

    ESP32 -WROOM-32E Chipset

    2 Channels (Use CLK as second Channel)

    I2S PDM Digital Microphone Built in 

    Fuse Built in

    RF433 Built in

    IR Remote Control (optional)

    RF433 Remote Key (optional)

    RF433 PIR Sensor (Optional)

     

    Input: 5V-24V

    MaxLoad: 16 A

    16A Relay Switch

    Strip types support: WS2812B WS2811 WS2813 WS2815 SK6812 TM1814 APA102 WS2801 LDP8806 GS8208

     

    GPIO:

     

    • Button(GPIO0)
    • Relay(GPIO2)
    • DAT(GPIO18)
    • CLK(GPIO5)
    • IO17(GPIO17)
    • IO16(GPIO16)
    • IR(GPIO25)
    • I2S_SDPIN(GPIO32 )
    • I2S_WSPIN(GPIO15 )
    • I2S_CKPIN(-1)
    • RF_433(GPIO23)

     

    Notice: If you want to upgrade the firmware, please use "WLED_0.x.x_ESP32_audioreactive.bin"

     

    Custom version firmware

     

     

    The device firmware uses DATA1 (GPIO18) as the DATA of the WS281X type light strip by default. If you have other types of light strips, please set it on the setting page according to your actual situation

     

    WLED ESP32 RF433 Music Addressable LED Strip Controller

    35.90$ מחיר רגיל
    19.75$מחיר מבצע
      bottom of page