WLED Sounds Reactive WS2815 Starter Kit
The starter kit includes:
1x LS8P ESP32 WLED controller
1x 12V7A Power Adaptor
1x WS2815 5m
1x DC Cable
1x User Manual
Wire Diagram
1. Connect the power cable and strip cable to the controller.
2. Connect the strip light to the controller, ensuring that VCC is connected to 12V, DAT to D0, and GND to GND.
3.Connect the power adaptor to the controller.
The LS8P ESP32 Sounds Reactive WLED Controller
ESP32-WROOM-32E Chipset
2 Channels I2S PDM Digital Microphone Built in
GPIO:
Button(GPIO0)
Relay(GPIO2)
DATA1(GPIO18)
DCLK1(GPIO5)
DATA2(GPIO17)
DCLK2(GPIO16)
IR(GPIO25)
I2S_SDPIN(GPIO32 )
I2S_WSPIN(GPIO15 )
I2S_CKPIN(-1)
The 12V WS2815 Strip Light
Length: 5M
LED: 60leds/m
FPCB Width:10mm
PCB Color: White
WaterProof: IP20 (None-waterproof)
The Power Adaptor
EU/US/UK Standard Optional
AC Input:110-240V 50/60Hz
DC Output: 12V7A
Tips
1. To reset the controller, please press and hold the key more than 10s
2. Upgrade to oifficial firmware might disable sound reaction function.
To build your own firmware please visit: https://github.com/athom-tech/Sound-Reactive-WLED
Youtube Reviews:
By Simon Says Home Assistant:
Setup tutorial for Athom LED strips preloaded with WLED
top of page
99.00$ מחיר רגיל
69.30$מחיר מבצע
bottom of page