mmWave and PIR Human Presence Sensor
Made For ESPHome
Model:PS02C3
Input:DC 5V 1A Type-C
Wi-Fi Type:2.4GhzSize:44*22*72mm
Working humidity: 5~95%RH
Operating temperature: 0°C~+40°C
Radar Frequency:24Ghz(ISM)
Features:
- Integrated Luminance Sensor
- Build In CH340C serial chip, you can flash your firmware directly
- Built-in ESP32C3 chip
- Radar sensitivity and detection distance are adjustable.
- The product has human presence, micro-motion, and human motion detection capabilities.
- It can detect the presence or absence of individuals within the designated area and their movements.
GPIO
- Radar Output:GPIO4
- Pir Output:GPIO3
- Radar TX:GPIO8
- Radar RX:GPIO5
- LED:GPIO2
- Button:GPIO9
- BH1750 SDA GPIO18
- BH1750 SCL GPIO19
Simple automation: use Occupancy as a trigger, trigger automation to make your lights turn on
Installation Precautions:
- Choose a suitable installation location away from air conditioners, curtains, fans, plants, etc. to avoid interference.
- Avoid direct beam irradiation on the ground, walls or doors to minimize reflections and indirect detections.
- Configure appropriate detection distance, sensitivity and delay time to reduce interference from objects.
- Keep the sensor surface clean and free from dust and obstacles.
- Ensure the sensor has enough space around it for proper air circulation.
Human Presence Sensor Made For ESPHome
42.00$ מחיר רגיל
29.40$מחיר מבצע
Expected to ship in 10 days