top of page

This product is temporarily prohibited from being shipped to the EU. Buyers who require shipping to the EU are advised not to place orders. Orders that are placed will be canceled and refunded.

**This is Open Sources Homekit device, not certified by Apple MFI**

 

mmWave and PIR Human Presence Sensor

 

Model:PS01
Input:DC 5V 1A Type-C
Wi-Fi Type:2.4Ghz

Size:44*22*72mm
Working humidity: 5~95%RH
Operating temperature: 0°C~+40°C
Radar Frequency:24Ghz(ISM)

 

Features:

  • Integrated Luminance Sensor
  • Build In CH340C serial chip, you can flash your firmware directly
  • Radar sensitivity and detection distance are adjustable.
  • The product has human presence, micro-motion, and human motion detection capabilities.
  • It can detect the presence or absence of individuals within the designated area and their movements.

 

GPIO

  • Radar Output:GPIO14
  • Pir Output:GPIO12
  • Radar TX:GPIO15
  • Radar RX:GPIO13
  • LED:GPIO16
  • Button:GPIO0

 

Simple automation: use Occupancy as a trigger, trigger automation to make your lights turn on

 

Installation Precautions:

 

  1. ​Choose a suitable installation location away from air conditioners, curtains, fans, plants, etc. to avoid interference.​
  2. Avoid direct beam irradiation on the ground, walls or doors to minimize reflections and indirect detections.​
  3. Configure appropriate detection distance, sensitivity and delay time to reduce interference from objects.​
  4. Keep the sensor surface clean and free from dust and obstacles.​
  5. Ensure the sensor has enough space around it for proper air circulation.


 

 

Homekit Human Presence Sensor

44.00$ מחיר רגיל
30.80$מחיר מבצע
    bottom of page