Pre Flashed ESPhome EU Plug , Automatically detect by Home Assistant
Notice:
The plugs shipped after 7th May 2022 are upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
Build in ESP8285 chipset with 2M flash
Yaml File Download:
https://github.com/athom-tech/athom-configs/blob/main/athom-smart-plug-v2.yaml
Specification:
- Input voltage:100-240VAC 50/60Hz
- Current:16A(Max)
- Power rating:3680W
- Product Size:L51*W51*H85mm
- Standard:EU
- Wireless standard:IEEE802.11b/g/n,2.4GHz
- Housing Color:Whtie
- Operation Temperature:-20?~+50
- Plastic material:ABS+PC
- Fire-protection rating:94-V0
- Package Size:62*62*86mm
- Weight:80g
GPIOs:
GPIO# Component
GPIO3 CSE7766 Rx
GPIO5 Button1
GPIO12 Relay1
GPIO13 LedLinki
The old version ( Shipped before 7th May 2022):
| GPIO# | Component |
| GPIO0 | None |
| GPIO1 | None |
| GPIO2 | None |
| GPIO3 | Button1 |
| GPIO4 | None |
| GPIO5 | None |
| GPIO9 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | LedLink |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Steps to Install :
*Power on the plug
*Use your phone/computer search the SSID: Athom_xxxxxxx
*Connect it and set the SSID and password of your 2.4G WiFI
*Go your Home Assitant find the new device and complete installation
Product Highlights
EU Plug Made For ESPHome is a local smart plug made for ESPHome and Home Assistant. It is suitable for appliance control, scheduling, and Home Assistant automations.
Ideal For
- Appliance control
- Power monitoring where supported
- Schedules and Home Assistant automations
Compatibility
Designed for local smart home use with Home Assistant. Products marked as Made For ESPHome use the correct Made For ESPHome compatibility wording and are intended for ESPHome-based local control.
