Pre Flashed ESPhome Brazil Plug , Automatically detect by Home Assitant
 
 
Notice:
Upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
 
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
 
 
Build in ESP8285 chipset with 2M flash
 
Yaml File Download:  
https://github.com/athom-tech/athom-configs/blob/main/athom-smart-plug-v2.yaml
 
Specification:
*Input voltage：100-240VAC 50/60Hz
*Current：16A(Max)
*Power rating：3840W
*Standard：Israel
*Wireless standard：IEEE802.11b/g/n,2.4GHz
*Housing Color：Whtie
*Operation Temperature：-20℃～+50℃
*Plastic material:ABS+PC
*Fire-protection rating:94-V0
 
GPIOs:
 
GPIO3： CSE7766 Rx
GPIO5： Button1
GPIO12 ：Relay1
GPIO13 ：LedLinki
 
Steps to Install :
 
*Power on the plug
*Use your phone/computer search the SSID: Athom_xxxxxxx
*Connect it and set the SSID and password of your 2.4G WiFI 
*Go your Home Assitant find the new device and complete installation