🌍 Smart Wi-Fi Power Plug (EU) – Based on ESP8285 with Power Monitoring | Pre-flashed with Tasmota
 
This smart EU power plug is built around the Espressif ESP8285（2MB） Wi-Fi microcontroller and comes pre-flashed with Tasmota firmware, enabling fully local control via MQTT, HTTP, or Web UI—no cloud required.
Equipped with the HLW8032 precision power metering chip, this device provides accurate, calibration-free measurement of voltage, current, power, and total energy consumption. Ideal for energy monitoring and home automation systems like Home Assistant or openHAB.
 
⚙️ Key Features
🔌 EU Standard Plug – Compact Type F (Schuko) design, fits most European sockets.
💡 Pre-flashed with Tasmota – Ready to use out of the box. Supports MQTT, HTTP, and Home Assistant auto-discovery.
⚡ Precision Power Monitoring – Integrated HLW8032 metering IC delivers real-time voltage, current, and power readings without calibration, ensuring high accuracy and reliability.
📶 Stable Wi-Fi Connectivity – Based on ESP8285, offering solid 2.4 GHz performance, OTA updates, and wide compatibility.
🔒 Safe & Certified – CE-certified, flame-retardant PC housing, and overload protection for peace of mind.
🧠 Smart Automation Ready – Seamless integration with Tasmota rules, automations, and MQTT platforms such as Home Assistant or Node-RED.
 
📊 Technical Specifications
Parameter
Description
Main Chip
Espressif ESP8285 (2MB Flash, integrated Wi-Fi)
Power Metering Chip
HLW8032, high-accuracy, calibration-free energy measurement
Firmware
Pre-flashed Tasmota
Input Voltage
100 – 240 V AC, 50/60 Hz
Maximum Load
16 A / 3680 W (resistive load)
Wireless
2.4 GHz Wi-Fi (802.11 b/g/n)
Monitoring Parameters
Voltage / Current / Active Power / Total Energy
Communication Protocols
MQTT, HTTP, Web UI, Home Assistant auto-discovery
Safety Certification
CE
Plug Type
EU Type F (Schuko)
Enclosure Material
Flame-retardant PC
Dimensions
50 × 50 × 82 mm
Operating Temperature
−10 °C to +40 °C
 
Template:
 
{"NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18}
 
GPIOs:
 
GPIO3： CSE7766 Rx
GPIO5： Button1
GPIO12 ：Relay1
GPIO13 ：LedLinki
 
Notice:
HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.
 
Youtube Reviews:
ATHOM Powerplug (Danish)